Quote:
| Originally Posted by Lone359 Hey guys, i field stripped my marker for the first time yesterday and put it back together, when i was putting it back i noticed a o-ring inside the internal valve right down the end where the washer sits, so its the most forward o-ring, anyway, that has come off but there is no way of getting to it (at least that i know of) is that gonna be a problem to fix or will the gun pretty much fix it next time it is pressurized and fires?
Any help is greatly appreciated |
The O-ring fits, but you may be looking at it wrong. This O-ring is the only one in the gun that snap into a groove. All the other O-Rings go on the outside of other parts like the bolt.
It's going to take some effort to get it in. It won't just "pop" into place. You'll have to pinch it a little and work it around until you can get it all settled into its groove.
And don't even think of gassing up the gun! If you do, you'll just empty the bottle because the valve isn't going to close and hold pressure 'till you fix it.