Another JCS Powertube ???

-Javier- · #1 (**permalink**) 07-12-2008, 09:02 PM

hi, does using a red hot jcs powertube are you using the stock front bolt or the one that came with it? if you are using the stock front bolt i would love to know why. thanks

HollowPoints · #2 (**permalink**) 07-12-2008, 09:37 PM

All the jsc power tubes come with a jcs hex bolt. I use the hex bolt only because its has a tighter fit around the power tube the stock bolt has alot of slop/play.

Pure Excess Industries · #3 (**permalink**) 07-13-2008, 12:37 AM

I run a Red Hot with the Hex bolt that came with it. No problems what so ever.

chimchim · #4 (**permalink**) 07-13-2008, 04:04 PM

I tried to install red hot aluminum power tube and tried to get it chrono'd but they couldn't get it below 400... tried adjust the spring but it even the shop couldn't get the right length spring ... either they're retarded or redhot powertube sucks... idk i put my old one back in

Pure Excess Industries · #5 (**permalink**) 07-13-2008, 05:12 PM

Quote:

Originally Posted by chimchim

I tried to install red hot aluminum power tube and tried to get it chrono'd but they couldn't get it below 400... tried adjust the spring but it even the shop couldn't get the right length spring ... either they're retarded or redhot powertube sucks... idk i put my old one back in

Are you using the stock spring? You might want to try the Trinity Spring kit, it should keep you in the right velocity range. The shop most likely is doing something wrong.

wingnut · #6 (**permalink**) 07-25-2008, 09:01 PM

i have the red hot jcs and the howitzer bolt but the howitzer wobbles around on the powr tube i have' tried firing it yet though, looks like problems

wingnut · #7 (**permalink**) 07-25-2008, 09:01 PM

have'nt.. sorry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode