Hello, I just purchased an A-5 with E-Grip and it's awesome, but I have a problem. I also bought a double trigger with the guard. I opened it up and it's pretty simple to put back together, but a piece fell out and I don't know where it belongs. The piece has a stainless steel finish, it's open in the middle and it looks like a little pitch fork, but it only has to ends and it's bend on both ends. I'm not sure if it belongs on the trigger part or it pertains to the E-Grip. I have a picture so you can know what I'm talking about. http://i125.photobucket.com/albums/p...nTrigger-1.jpg
Hope there is someone out there that can help me out. Thanks in advance.

The pic is not working for me can you repost it.

__________________
To close for missles, switching to guns.

What's up? The upload option is not working for me I have it less resolution and the pic is only 52.kb and it keeps telling me that it's over the limit. I dunno. Well I can email you the pic if you would like to see it.

You can email me if you would like to see the pic. Thanks.

All right I placed a url on my post. Maybe you can tell me where this piece goes. Thanks.

If you need a place to upload images the A5OG has provided http://www.pbupload.com to it's members.

Secondly the 'little pitch fork' sounds like the egrip switch tab has fallen out. This will require a phone call to Tippmann support for replacement.

__________________
Upload your A-5 pics @ PBUPLOAD.com

Thank you for the solutions on both issues. I thought I can just look for a picture on the E-Grip Switch Tab so I can install it. There has to be a picture out there.

Here's a side view of the micro switch plate on the APE egrip.

__________________
Upload your A-5 pics @ PBUPLOAD.com

Thank you for the information and picture it was a big help. I finally got it fixed with the picture that you posted. Thanks a million.

Thank you for the picture and resolving the other issue as well. I greatly appreciate it. I already fixed it and it's working fine. Thanks a million.