I Have A Tippmann A5 With Response Trigger And Forward Expansion Chamber And When I Use The Remote Line I Can Get Good Fire After A Few Shots It Acts Like Its Out Of C02 Is It Becasue I Have To Much Relying On Air Like Cyclone, Expansion,and Responce Trigger Help Needed

I am not sure what the issue is. I run a remote on my RT and never have problems. The expansion chamber should not cause an issue either as it just lets the c02 expand from liquid to gas before entering the marker. One thing I have had happen on with the remote though is I turned the knob in too far and it restricted the flow enough to cause it to act like I was out of air. Now I turn it in and back it off 1/2 a turn or so.

__________________
"Only the strong survive. The weak are killed and eaten as fingerfood." SDI SSgt Patterson, Platoon 1077 USMC

wow, i have no clue what you are saying, can you rephrase that and not capital every first letter, it's hard to read.

__________________
old name: 1shot many kills
t8og.com for all your tiberius 8 and 9 needs!

I had the same problem when the valve on my remote line was all the way open. Thry cranking it down a bit and see it that fixes it.

there is something with the connection at the air tank and the line. The few good shots is probably a combo of air in your line and expansion chamber, does your line tighten up when you screw in the knob for the air to run through it? If not, then its something with the line, use the tank straight to the marker to isolate the problem just to be sure and see how it does.

__________________

I honestly don't understand what you are saying but it seems like the knob on your coil is either not turned on or not enough. Please rephrase the question and maybe I could help you out some more.

__________________

A5 - W.A.S E-grip - Polished Internals - Double Trigger - Adjustable Car Stock - NcStar 4 Reticle Red Dot Sight - J&J Edge Elite Kit - Wargear Flexi Paddles - Vortex Mod - X7 Hopper - Remote Coil - CO2

I don't think that using remote and expansion chamber together is a good idea
If you want to use remote then get rid of expansion chamber

I concur with markerman. The remote itself will act as a pseudo-expansion chamber due to its volume. You can remove your expansion chamber as it is just adding unnecessary weight.

__________________

Hook your bottle directly to the marker. If it shoots OK, then you know that the problem is in the remote. I have seen a remote collapse inside the hose and not allow enough flow through the hose. I have also seen the bottle connection not allow the valve to open the bottle fully. Attach the bottle, screw the valve all the way in and then back out about a 1/4 - 1/2 turn. I have seen them go to far. Make sure the problem is in the remote or the marker first.

__________________
Courage is the first of human qualities because it is the quality which guarantees all others. - Winston Churchill

Simmy's Feedback UMS Informer (click link)

Could you please explain what you mean by a remote "collapsing inside the hose"? How does this happen, how to detect it, and what exactly occurs?r

__________________