I have been playing around with the my A5's trigger spring, but here is where I differ from anyone else I have been able to find....(speed ballers and milsim critics, brace yourselves or exit now...)

I want to make my trigger pull HEAVIER, approximately 7-9 lbs to be exact, to simulate the feel of my real weapon (we use GUU-5's, essentially an old M-4).

Anyone here have any ideas or good places to find heavy but small springs other than perhaps a hardware store?

Thanks for any assistance.

Cheers!

-Dustin

If you want to use a heavier spring, you can still use a clicky pen mod. Just try to find a spring that is longer the stock one and try it. I was messing around this weekend and did get a harsher pull.

Will the plastic trigger handle a spring with that much tension ? Thats alot of psi on that little plastic tab.

__________________
I'm your Huckleberry......

go to a hardware store and see how stiff of a spring you can get.

__________________

Pens don't use springs that stiff. Maybe the red spring from a kit?

If you don't think your stock trigger will hold up, there is a guy selling metal single triggers for the A-5 over on SpecOps.

__________________
"The barrel length is 12”. I think because that was the easiest number to patent." -vanillaiceyupyup
http://cgi.ebay.com/VERY-UNIQUE-SP-AA-12-Angel-Thread-Barrel_W0QQitemZ260245161771QQihZ016QQcategoryZ160 46QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

HAHA...yeah...already tried that spring...LOL

I am relatively certain the trigger will be just fine, BUT....I have been looking for a single, metal trigger FOREVER!!! Can you please link me? That would be REALLY appreciated.

Sure, let me find it.

I made a REALLY hard trigger pull. It took the red spring, and cut it a little longer than the stock spring. Then I cut another red spring a tiny bit smaller than the first, and screwed them together. Let me tell you, ya ain't going to walk this trigger!

Also, if you replace the sear spring with a piece of red drive spring, that should get you around 15 lbs

__________________
"The barrel length is 12”. I think because that was the easiest number to patent." -vanillaiceyupyup
http://cgi.ebay.com/VERY-UNIQUE-SP-AA-12-Angel-Thread-Barrel_W0QQitemZ260245161771QQihZ016QQcategoryZ160 46QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

HAHAHAHA GENIUS...may have to try that, sounds like fun...also heading out to get a pull scale...gonna be a fun weekend....I really oughta get a life...HAHAHA

A really heave sear spring and trigger spring?

__________________

Oops, they say they are for egrips, but they look like they would work.

New Trigger for the A5 Egrip - Special Ops Forum

Yes, the double red drive spring works well, but the drive spring on the sear plus the double trigger spring.... Well, it either didn't work, or the pull was too hard.

I tried to pull the trigger but the marker didn't fire. I could have pulled harder, but didn't want to break anything.

__________________
"The barrel length is 12”. I think because that was the easiest number to patent." -vanillaiceyupyup
http://cgi.ebay.com/VERY-UNIQUE-SP-AA-12-Angel-Thread-Barrel_W0QQitemZ260245161771QQihZ016QQcategoryZ160 46QQssPageNameZWDVWQQrdZ1QQcmdZViewItem