I was in search of a palmer stabilizer. I desided that i would go with the inline setup on a remote. On the palmer web sight the options say,
Gauge option -
Pressure range -
I was wondering what the difference was? Also what ones would you suggest to get?

Gauge option is whether you want a gauge to tell what the PSI is set too.

Pressure range should be 0-800

I suggest you get a Gauge, but that is just personal preference.

I believe it means "Do you want a gauge and what pressure would you like the readings to be". I would recommend the 1200psi gauge. Get the stabilizer with a gauge installed.

__________________

Psalm 25:4-5 "Teach me and show me Your ways Lord"

Its easy to install one yourself. Just use thread tape (wrapped clockwise) on the threads, and make sure not to screw it in too deep or you will hit the internals.

I would definatley use a guage, it makes it a lot easier to read the regs internal pressures.

__________________
The shroud of the Dark Side has fallen.

www.thehighroad.us

I would say not get anything lower then 900psi unless you are running with a LPK. I have a 0-1200psi guage that I purchased on my own and installed. As mentioned earlier it is a simple installation and will save you money rather then having Palmers do it.

$12 isn't too much, considering if you got it somewhere else you would have to pay shipping which would put it at $12 anywya

i bought my gauges from lucky7 on ebay. i got 2 0-500 psi gauges and 3 0-1200psi gauges for about $26.

__________________
SilentDeath12886's Compilation of A-5 Projectshttp://www.a5og.net/5-photo-gallery/...tml#post125307
The E-bolted A-5http://www.a5og.net/5-mods-upgrades/...tml#post108414
The X7 egrip retrofitted A-5 http://www.a5og.net/5-mods-upgrades/...tml#post122941
The old A-5 http://www.a5og.net/showthread.php?t=5009
The 98c backuphttp://www.a5og.net/showthread.php?t=5893