Female Regulater from Palmers?

[A5_assaulter]

I am getting an A5 once i have some money, and was wondering about the Palmers Female Regulator? How does it work, where does it go, and if you got pictures with it the can I see them?

[Balu]

here is where it hooks up and looks like
the tank connects to the stabilizer

[-Javier-]

but what does does? in what ways does it helps?

[Zoo]

I'm sure this is listed in many other threads, but here's the quick answer:

The stabilizer (male, female, inline, whatever) regulates the pressure going into the marker, making it more consistent. Makes the most difference when using CO2, but also helps when using HPA too.

The bottomline setup (at the base of the gripframe) is the most common, but the female stabilizer can be mounted side-saddle-like and many other ways. Check here.

[-Javier-]

Originally Posted by Zoo

I'm sure this is listed in many other threads, but here's the quick answer:

The stabilizer (male, female, inline, whatever) regulates the pressure going into the marker, making it more consistent.

on what psi does the a5 runs properly and do i need one running hpa?

[Zoo]

That will depend on each individual marker (if internals are polished, any upgrade springs are used and so forth), but commonly around 700 psi. Just have to use trial and error on yours and fine the right spot.

[-Javier-]

well i dont mean to hijack this thread,
the only thing i am using is what on my sig, do i still need it?
i am not having any problem with any of the mods i have.

Originally Posted by Zoo

That will depend on each individual marker (if internals are polished, any upgrade springs are used and so forth), but commonly around 700 psi. Just have to use trial and error on yours and fine the right spot.

[Zoo]

You don't need it, so It's up to you, really. The nice thing about an adjustable regulator is that you can dial it down to near the minimum psi needed to still shoot the marker, and get as many shots out of a tank as possible. If you get it, I suggest getting an RVA also to help fine-tune your velocity.

[Small Block]

If anyone is interested in the r/s mount for the reg. made out of the LAPCO site rail, you can buy it all pre-made up from the UMS too.

Underground Mod Shop

[A5_assaulter]

Can you get any regulators that screw into the ASA or go on the CO2 tank? And how did you attach that thing on the bottom of your gun?