also try putting a bb in the drive spring hole.

__________________

The problem I have is no crono. I was planning on getting the spring first then take a trip to e-jam here in NJ, they have a crono.

If they don't let me use it I will pay for the day. Might as well game a couple of games in.

__________________
Put one in um even at two feet away, they should have heard you coming!

A-5: Flatline w/ Battle Shroud, X7 Hopper, Response Trigger, Double Trigger, Collap Stock, Palmers Stab, Remote Line, Co2 (3), TechT Paddles.
Upgrades Needed: New Paint job, 4500 HPA.

Duff-

BB? Please explain.

__________________
Put one in um even at two feet away, they should have heard you coming!

A-5: Flatline w/ Battle Shroud, X7 Hopper, Response Trigger, Double Trigger, Collap Stock, Palmers Stab, Remote Line, Co2 (3), TechT Paddles.
Upgrades Needed: New Paint job, 4500 HPA.

The BB from the BB guns, pellet guns, just drop 1 or 2 BBs into the hole on the end cap or the stock end cap where the spring goes into.

ahhhhhhhh! I got it...a BB. Duh. I just shot a ground hog with one this morning! The pointy kind, so yes I do have a few 100 around the house.

__________________
Put one in um even at two feet away, they should have heard you coming!

A-5: Flatline w/ Battle Shroud, X7 Hopper, Response Trigger, Double Trigger, Collap Stock, Palmers Stab, Remote Line, Co2 (3), TechT Paddles.
Upgrades Needed: New Paint job, 4500 HPA.

Yes but the BB is not the pointy kind, thats pellet. BB is the metal little ball metallic looking. They are both used on pellet/bb guns but they are not the same. Make sure is BB and not pellet since pellets are made of lead and will probably damage or get stuck in there.

i chrono would be a good investment. your local shop should have pne also. yes, the BB thing is correct as said above^^

__________________

Does it matter that I am working off a remote line?

__________________
Put one in um even at two feet away, they should have heard you coming!

A-5: Flatline w/ Battle Shroud, X7 Hopper, Response Trigger, Double Trigger, Collap Stock, Palmers Stab, Remote Line, Co2 (3), TechT Paddles.
Upgrades Needed: New Paint job, 4500 HPA.

not really, but you could try without a remote if you want.......

__________________

Is it a 32 degrees remote?

Remember not to screw the plunger on the coil down all the way. Screw it until it pressurizes, about another 3/4 turn, and that should suffice.

If not, you might starve air.

__________________