Right i am a TOTAL noobie to the tippmann thing. When i removed the tombstone and i fiddled about with the gun for abit this metal o-ring fell out... My gun has a upgraded power tube which has a clear o-ring in it... Did this come out of the powertube or the tombstone... Thanks.
Look Behind,
P.S. I use ... Alot

That "metal oring" is a washer.....

The washer goes in first, then the oring....Tombstone holds them in

PS welcome to the OG

__________________
Lee Smith
Dead Box Clothing
lee@deadboxpaintball.com


Dead Box Shirt Offer for OG

This might help.

Total Valve Maintenance v2

__________________

http://www.PureExcessIndustries.com
Pure Lube Review on X7og.net

Hi i was just wandering if the washer went firther towards the front of the gun or firther to the back... "put the washer in first" doesent give me a clue which way it goes
P.S. I Repd both of you

the washer goes in the valve....in the middle of the gun, housed in the power tube. The when you remove the tombstone from the power tube, you can see that clear oring. Take it out and put the washer in the valve, then put the oring back, same with the tombstone, and you're in business. Thanks for the rep.

__________________
Lee Smith
Dead Box Clothing
lee@deadboxpaintball.com


Dead Box Shirt Offer for OG

Well when you look inside that slot where the tombstone-looking thing goes, there is a little hole in there that the washer and o-ring will fit into. Towards the back I believe.

So what you want to do is get the wasger in there, and then press the o-ring into place carefully with a flathead screwdriver.

Usually you don't have to do this if you're careful not to press on the valve during disassembly.

__________________

New members please read this first and use this as required. Thank you.

Ok so "carefully" your saying that to the wrong person because i am clumsy but ill have ago anyway

Well i'm saying carefully because some members may disapprove of using a hard, sharp screwdriver to put a relatively fragile o-ring into place.

Good luck. If you're still having problems, we'll be here to help.

__________________

New members please read this first and use this as required. Thank you.

come into another dilema... i have no idea seems as i am new to the tippmann thing... SO... the washer goes to the side which would be towards the back of the gun. Then infront of that(to the front of the gun side of the washer) the o-ring goes... NOW... the part im most confused on (doesent take much) is the spring. Should the spring go through the washer and oring or should the tombstone be "sandwhiched" (yes i know i said it) between the spring and the o-ring?

Go to the link that Pure Excess Industries provided (this one). I believe that the spring you're referring to goes in before the washer and o-ring.

UNLESS it's the tombstone latch spring.

__________________

New members please read this first and use this as required. Thank you.