New/ used A-5 stealth.. With out pressure When I turn on the e-grip I can cycle through the functions and here the grip ramp up. As soon as there is pressure... even with out turning the e grip on I turn on the e-grip and it still just goes full auto chopping balls, throwing paint vapor and shell with a intact ball every now and then. There is no one shot...as soon as you pull the triger BRRRRRRRR. My guess is a bad gasket?? Going to tear her all the way down tonight and try to figure out what is wrong??

The sear and rear bolt probably need to be replaced. Especially if that is what it is doing without the egrip on. If the sear is rounded off the rear bolt will not catch on the sear. Or in the same way if the rear bolt is rounded off the sear will not catch it. I reccommend changing both parts. Can be found at tippmannparts.com. I think for both pieces it will be under $25.

Edit: for an egrip you need a sear with a hole and not a slot.

__________________
If vegetables are bad and some people are bad, then are some people vegetables?

Here are the parts:

TA01135 Sear [98AE,98PSAE,A5E,ABE,CProE,CProAE,CProPSAE,EXT]
02-11 Rear Bolt [A5,X7] - New Jan 06

__________________
If vegetables are bad and some people are bad, then are some people vegetables?

Thank you......