Pretty much,it's just the 1/8 hoses with 1/8 barbed fittings.All it dose is give the cyclone and R/T a larger volume of air.

__________________


a bad day paintballing is beter than a good day at work!!!!

That's what I'm reading it to be. Of course, with bigger lines you must "upgrade" your fittings as well.

__________________
The "Dead Box" is calling for you

The 1/8" upgrade kit is great especially if you tend to use your air down to the last shot. When you run the 1/8" hoses, I found that the cyclone will work all the way until you run out of air or Co2 versus the smaller stock hose usually will starve the cyclone when you get down the last 30 or so shots on a tank and the cyclone will stop feeding paintballs. Bottom line, it made the gun more efficient.

sweet thanks guys...sorry to thread jack.

I'm thinking about a R/T project for the summer

__________________

What ya got in mind Fonz?
I thinking of taking my Super RT off of my A-5 an puttin' it on my 98.
Also planning on selling my was board for my 98 once I ship it off to tippmann.
Broke the LED on the board.

__________________

Only You Can Prevent PaintBall Drama!

I think I got my egrip finally how I want it, But I always have to tinker with something. So I am thinking about making a Super R/T to switch out. I want to test my BPS on semi with my new trigger setup. I say summer project because I am pretty broke right now, finally broke down and bought me a tac 8 lol, plus not to mention the little unmentionable I have coming in the next month

__________________

If ya want you can try out my Super RT on your marker to see how ya like it before ya go out an buy one.
You don't have an RT on any of your A-5's?

__________________

Only You Can Prevent PaintBall Drama!

Ive had 2 in the past, and sold them both, dirt cheap actually.
but neither could I find the sweet spot. so I just used response mode on my egrip, but now all fields arent allowing that. So i now got the RI magnetic trigger and I am finally gonna test that out tomorrow. see how well it shoots on semi.

but why are you getting rid of it?

__________________

I'm not gettin rid of the RT.
I'm gettin' rid of the e-grip/board for my 98.
IMO, The RT works better with the 98. Less parts involved for use with the 98
The A-5 is getting torn down an sanded for the new paint job to come.
So the 98 will be my primary through the summer.
Also, I'm not putting the RT on my 98 until after I get the A-5 done, an buy some gear that I need.
I make myself get somethings done before I'll let myself do other things.
I'm weird like that! But it works for me.
So the RT will just be sitting there for a couple of months if ya want to use it.

__________________

Only You Can Prevent PaintBall Drama!