I’ve seen the kit on Tippmannparts.com for the Super R/T kit. I’m actually thinking about going for this, but I do have one question.
It says that I need to have a little extra hose to connect everything up right. I have about 15’ of macro line left over from a previous project. Can that be used, or do I need to use the rubber hose they’re showing on the site?

__________________
The "Dead Box" is calling for you

Probably measure the inside diameter of the macroline and see if its 1/8 inch?

__________________

there is a actual kit? link?

__________________

Adapter for 98 with Cyclone Feed and RT

It's for the 98, but they say it'll work for the A5 with the extra line.

__________________
The "Dead Box" is calling for you

Ya the kit will work on the a5, do you have a pic of the macroline you have? Or a link?

__________________

nah, the line was from a friend at our local shop. we needed some, so he gave us a roll. i'll go look at it and see what it's specs are.

So, as long as it's 1/8" ID...it should work?

__________________
The "Dead Box" is calling for you

I think so. The barbs on the banjos are 1/8.

__________________

cool! thanks for the help!

for the assistance!

__________________
The "Dead Box" is calling for you

macroline is much "stiffer" than the "microline". Evan though it's the same size it won't stretch over the barbs let alone stay sealed with pressure. I just went through the same situation... looked for the microline everywhere. Just spend the extra $2.10 for the 3" piece.

Question. Is the Super R/T just a R/T with bigger macroline?