Hello,

I am someone who has played paintball for awhile but is just getting into better guns and upgrading. My situation is this:

I currently have an A-5 with a Response Trigger, Flatline, Flame Drop Forward. I wanted to put a low pressure kit on my gun and I will be running CO2 on it currently. I want to put red macroline from the ASA to the LPK. and also put red microline on the side of the gun for the R/T. I would like to know everything I need to do this job. If someone could provide a list of every single part needed from fittings to the kit itself, and a location of where these can be purchased as well. The other thing I would like is a list of what I would need to put red macroline on my a-5 if I DO NOT get the LPK I want. I need to know the fittings to adapt the macroline to the tombstone and so forth. Thank you very much if you could help a.s.a.p. because if I'm lucky I can get most of it for Christmas. Thanks Again

Sincerely,
Kyle

Well, I can help you out with part of it.

To attach macroline our tombstone, you'll need 1/8 NPT to 1/4 Slip fittings (better known as Macroline elbows)

You'll need different spurs on your R/T and banjo fitting to attach macroline. I don't know where you'd pick these up.

__________________

Thank you for that but you would need more than that to attach it to the tombstone I believe because I dont see any place for the threads to attach to.

Duh. Sorry about that. You'll need an ASA to 1/8 plug.

__________________

almost all of your fitting and hose's can be found here

https://www.palmer-pursuit.com/ecom/index.php/cPath/30?

i highly suggest calling them up, very friendly and easy to talk to. and walk them through what you need and they will glady help you through everything and know exactly what you are talking about.

__________________

Thank you guys very much for responding so quickly I'm calling them today. Much Appreciated.