Ultimate Q-Loader Thread

[cubansniper]

Answers to Zenschematic:

1.) There is a small screw (plug) that blocks the hole.
2.) Placing the loader is your choice. I have it on the left side so that when I "snap" from a bunker the ONLY thing facing out on the right side is my barrel, a small piece of tube, and my red dot, and part of my mask. But you can load it anywhere you choose. The balls in the tube can "fall" in to the breach, but in most cases you need to load a new clip so that the clip can start applying pressure again.

[pvcHook]

Originally Posted by zenschematic

1. After taking off the cyclone hopper on the a5, what happens to the exhaust hole that pushes the cyclone hopper. Is it just filled with a hole, or a do u run a line somewhere? or do u just leave it unbolted?

You have to plug up the hole with a small bolt.

Originally Posted by zenschematic

2. what happens as you start running out of balls towards the end of the pod, what happens to the balls that are still located in the sleeve in between the chamber and the pod, how are these balls pushed into the chamber, if no other balls are pushing them into the chamber from behind. Im sure its easier than I'm thinking but was just curious.

They aren't. Once your pod is empty, you'll be able to fire the ball already in the breach and then its time to change pods. The balls already in the tube will act as a buffer so that the new pod doesn't crush paint as the spring unwinds when inserted in the marker.

Hope this makes sense.

[zenschematic]

aaaahhhh, nice, sweet...thanks guys, time to order, looking at which package to get, u think its more reasonable to get the q +200 or q +500?

[Kevin M.]

Go for the 500 rd kit. It is a little more money, but it is really handy to have an extra 300 balls on you when you need them. There are games when I only bring 3 pods on with me, and other games, like attack and defend, I bring all five.

It will save you from needing to do another purchase later on. XD

[zenschematic]

ok, so i started taking apart my cyclone hopper off the gun, and tried undoing that little pass through screw/bolt where it feed the cyclone cylinder, is that the screw/bolt that i need to put back into gun?? or is it some other little bolt?

[[SCUBA]steve]

great post. thanks for taking the time to put up all the info.

[zenschematic]

hey guys,

sooooo, finally got all the q loader, and some other goodies

battle shrouded flatline,
metadyne under rail,
lapco adapter,
some no name brand asa which i thought looked in line with the a5 style,
trinity spring kit with red spring in right now, still have to test which will be best,
jcs red hot power tube,
APE board,
double trigger kit,
68ci 4500 crossfire HPA,

mods:
polished internals,
drilled into metadyne rail to attach q loader mount.

and an itchy trigger finger, after getting all the goods onto the marker.
just thought id share with you guys.

in any case, after installing the q loader, it is a bit finicky getting the pods loaded right, everything so far has been plug in play, but my questions are these

1. how many spring turns is it set to stock?
2. everytime i try n load the pod into the mount, it chops a paintball, which has been the past 2 times that ive tried loading it in, and so ive gone and unloaded the pod, and took everything apart to clean it all out. i tried going on the q loader forum, but it seems that its down for some heavy maintenance, anyone have that kinda experience with the q loader?

thanks in advance guys.