i have the Custom Product kit i run it on a 10inch . im extremely happy with it . the sweet thing about it, is that i can put an apex tip on the barrel. unlike some other kits that are fluted . check the reviews on that barrel kit on PBreview , you will see that it go excellent reviews.im not being bias

ah thanks, how long are the tips? with my SAW shroud I need at the very least 14" And I like at thats not fluted, I'll have to check that out.

One thing to consider with a Freak kit ( and yes I have a full one, ) is that the inserts are versatile. If you're going to stay with an A-5 your whole paintball life, then full backs aren't an issue. But if you may be changing markers ( I'm planning on an Automag in a few months ) then different threadings can be a problem. With full backs you either have to buy another set or get a thread adapter. The adapter will add extra length to the marker and you may have trouble finding the one you need. With a Freak I can just get one new back and the whole kit transfers over with it. Also, some other systems are designed to work with Freak inserts ( I saw a T-8 kit that ran off Freak inserts. ) Not only that, but you can get just about any tip with Freak threadings, not something every other kit can claim.

As for SS vs aluminum inserts, unless you're being really careless, aluminum will survive just fine.

__________________
You can't wipe a welt
-J

Paintball FAQ's | Asking yourself "What should I get next?" | Paint & Barrel Facts | Fixing the Chop
HPA vs. CO2 | Regulator FAQ's | To Remote or Not To Remote | Slide Checks 101 | LPK FAQ's
Complete A-5 Maintenance | Complete T-8 Maintenance | Which Vest is for Me? | Secondary Sights | Rails, Sights, & Targeting
Sale - Custom Vests, MOLLE Gear, Dogleg Stock, & More

yeah I'm still leaning towards the freak, my only concern is how well the inserts match up in the barrel, are there any gaps anywhere where a ball could break?

An A-5 has a smaller breach than, say, a 'Cocker threaded marker so the inserts don't go all the way inside. They fit tightly on a small shelf about an inch from the threaded end. I've got a 'Cocker back as well and the inserts are flush with the threaded end, but that's because 'Cockers don't have detents so the barrel match has to act as such.

__________________
You can't wipe a welt
-J

Paintball FAQ's | Asking yourself "What should I get next?" | Paint & Barrel Facts | Fixing the Chop
HPA vs. CO2 | Regulator FAQ's | To Remote or Not To Remote | Slide Checks 101 | LPK FAQ's
Complete A-5 Maintenance | Complete T-8 Maintenance | Which Vest is for Me? | Secondary Sights | Rails, Sights, & Targeting
Sale - Custom Vests, MOLLE Gear, Dogleg Stock, & More

ah I see, so it's still good an flush. well guess I'm getting a freak then. Thanks a ton guys. 4 everyone.